Working principle of hot melt welding machine
1. Specifications and working environment of plastic hot melt welding machine
Power supply: AC220V, 10A
Working pressure 2-10kg
Solderable plastic size: 250 mm×200 mm×150 mm
2. Structure of plastic hot melt welding machine
Mechanical part of plastic hot melt welding machine:
1. The host is an ordinary single-guide column hot melt machine, which can be installed with plastic hot melt molds. The size of the upper and lower molds is 240mm×210mm×260mm (width×depth×height).
2. Stable action and accurate control. The air pressure can be adjusted according to the needs of the welding workpiece. Ultrasonic mold, ultrasonic plastic welding machine, ultrasonic cleaning machine, ultrasonic metal welding machine
3. In order to facilitate the fusion welding of large parts and the operation of special weldments, the sliding plate device can be installed on the bottom plate of the main machine, the sliding plate stroke is 75mm, and the mold extends out of the main machine cavity to facilitate the installation and operation of the weldment to be safely welded.
4. In order to facilitate the quick adjustment of the welding head or quick mold change, setting devices can be added at the four corners of the mold to realize quick and accurate mold adjustment, shorten the mold adjustment time, and reduce the difficulty of mold adjustment.
5. The welding depth is adjustable. According to the requirements of the appearance and welding strength of the plastic part, the stroke of the upper mold should be adjusted appropriately to achieve the expected effect.
Electrical part of plastic hot melt welding machine:
1. The temperature control device can set the required welding temperature according to the shape, size and material of the workpiece.
2. The time can be adjusted. When welding plastic parts, the welding time can be increased or reduced according to the specific welding requirements to achieve the required welding effect.
3. Working principle of plastic hot melt welding machine
Electric heating transfers heat to the plastic part through the hot melt head, and achieves the desired effect through hot pressing. Suitable for on-site riveting and embedding. Ultrasonic mold, ultrasonic plastic welding machine, ultrasonic cleaning machine, ultrasonic metal welding machine
4. Recommended models of plastic hot melt welding machine
Small hot melt machine, medium hot melt machine, automobile bumper hot melt machine, servo hot melt machine, large hot melt machine, hot melt riveting machine
Previous: The difference between ultrasonic butt welding machine and ultrasonic spot welding machine
下一条: No Information